Kenmore HE2t front loading washer (about 1.5 years old) has an "F24" error, which is a water temperature sensor error. Sure would like to get it fixed.
Lance S
Dryer repair. (When turn to start get whirring/buzz but no movement or start - similar to when car engine won't turn over when turning ignition.) Less than 5 years old. Compact dryer stacked on top of washer (but not a stacked set) in compact closet space. Free in-home estimates only. Good price can fix immediately.
Tonya M
It's not recommended that you attempt refrigerator repairs on your own. Most refrigerator repairs tend to involve complicated procedures that are left best to professionals. However, if you are very confident about your DIY repair skills, you can attempt some basic repairs. Make sure that you cut off all power supply to the refrigerator before attempting any repairs. Failure to do so can result in injuries that can be fatal. If your refrigerator refuses to run, confirm that it has stopped by checking the light inside, or the sound coming from the motor or fan. Make sure that the refrigerator is receiving power. You can check by plugging a lamp into the refrigerator's power outlet.
If the refrigerator isn't cooling, check to see if it has completely stopped, and if it has not, make sure that the thermostat is turned to the right setting. If not, reset the thermostat now. Cooling problems can also occur because of problems with the compressor motor, which is located on the outside near the bottom of the refrigerator. If the compressor continues to hum, the problem may be linked to something else, and a qualified refrigerator technician must be called. Poor cooling can also occur because of heavy accumulation of frost on the evaporator coils. The refrigerator has a self defrosting mechanism, and if there are problems in the system, the appliance will continue its cooling function. This can cause frost build up on the evaporator coil. To check if this is the problem, remove perishables from the refrigerator, turn the thermostat knob to the off position, and leave the refrigerator doors open for about 24 hours, allowing defrosting to take place. When all the frost has been melted, turn the knob back to your normal setting.
You can minimize the need for refrigerator repairs by performing periodic maintenance. In case of a self defrosting refrigerator, remember to clean the drain pan at the bottom of the refrigerator regularly. The melted water collecting in the drain pan can lead to mold growth. Keep the coils of the refrigerator clean. You can find these behind or underneath the refrigerator. Make sure that the gaskets on the refrigerator door are sealed tight. To check if your refrigerator door gaskets are tight enough slip a piece of paper in between the door and the refrigerator, and close the door shut. Try to slip the paper out. If you can pull the paper out easily, then your gasket needs changing. To locate professional refrigerator repair services in Denver, simply fill out the form, and we will connect you with specialists who undertake repairs of all models of refrigerators, including Whirlpool refrigerator repairs, Amana refrigerator repairs, Kitchenaid refrigerator repairs, GE refrigerator repairs, Hotpoint refrigerator repairs and Frigidaire refrigerator repairs. Our specialists also undertake ice maker repair, compressor repair and other home refrigerator repairs.